|
Sensitivity (volts RMS) for full rated power at 4 ohms |
1.4V
|
|
Frequency Response (at 1 watt into 4 ohms, 20Hz - 20 kHz) |
+0/–1 dB
|
|
Signal to Noise Ratio (below rated 1 kHz power at 8 ohms), A-weighted |
100 dB (103 dB in XTi 6000)
|
|
Damping Factor (8 ohm): 20 Hz to 400 Hz |
> 500
|
|
Input Stage |
Input is electronically balanced and employs
precision 1% resistors.
|
AC Line Current
(120VAC amplifier playing 1/8 power pink noise into 4 ohms per ch) |
XTi 1000: 6.8A, XTi 2000: 8.3A, XTi 4000: 10.5A; at idle draws no more than 30 watts.
XTi 6000: 15.3A; at idle draws no more than 180 watts.
|
|
Crosstalk (below rated power) 20 Hz to 1 kHz |
> 70 dB
|
|
Input Impedance (nominal) |
20 kilohms balanced, 10 kilohms unbalanced
|
Load impedance (note: safe with all types of loads)
Stereo
Bridge mono |
2-8 ohms (4-8 ohms in XTi 1000 A1 100V versions)
4-16 ohms (8-16 ohms in XTi 1000 A1 100V versions)
|
|
Voltage Gain (at 1 kHz, 8 ohm rated output) |
XTi 1000: 30.5 dB. XTi 2000: 32.9 dB. XTi 4000: 34.2 dB. XTi 6000: 37.1 dB.
|
|
Maximum Input Signal |
+22 dBu typical
|
|
Operating Temperature |
0° C to 40° C at 95% relative humidity
(non-condensing)
|
|
AC Line Voltage and Frequency Configurations Available (± 10%) |
100V, 120V, 220-240V 50/60 Hz
|
|
Ventilation |
Flow-through ventilation from front to back
|
|
Cooling |
Heat sinks and proportional-speed fan
|
|
Dimensions: Width, Height, Depth (behind mounting surface) |
EIA Standard 19 in. W (EIA RS-310-B) x 3.5 in. (8.9 cm) H x12.25 in. (31.1cm) D
XTi 6000 is 16.2 in. (41.15 cm) D
|
|
Net Weight, Shipping Weight |
18.5 lb (8.4 kg), 21.5 lb (9.8 kg)
XTi 6000 is 24.0 lb (10.9 kg), 30.0 lb (13.6 kg)
|
.gif){kind=small}
